Manual shutter speed/aperture adjustment – Panasonic VDRD250EP Instrukcja Obsługi

Strona 80

Advertising
background image

Re

cording

Manual recording functions

80

LSQT1019

(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)

¬Rotate the mode dial to select

or

.

1 Set the AUTO/MANUAL/FOCUS switch to

MANUAL.

The icon shown in the illustration is displayed automatically.

2 Move the joystick left or right to select [

]

(aperture) or [

] (shutter speed).

3 Move the joystick left or right to make the

adjustment.

A Shutter speed:

≥ The shutter speed closer to 1/8000 is faster.

B Iris/Gain value:

CLOSE

# (F16 to F2.0) # OPEN # (0dB to 18dB)

≥ Value closer to [CLOSE] darken the image.
≥ Value closer to [18dB] brighten the image.
≥ When the iris value is adjusted to brighter than [OPEN], it changes to the gain value.

To restore to automatic adjustment

Set the AUTO/MANUAL/FOCUS switch to AUTO.

Manual shutter speed/aperture adjustment

Shutter Speed: Adjust it when recording fast-moving subjects.
Aperture:

Adjust it when the screen is too bright or too dark.

MNL

4/4 NEXT

MNL

4/4 NEXT

1/50 to 1/8000

VDR-D300 1/25 to 1/2000
VDR-D250 1/25 to 1/500

OPEN

OPEN

1/100

100

1/100

OPEN

MNL

BACK

A

B

≥ When setting both the shutter speed and the iris/

gain value, set the shutter speed and then set the
iris/gain value.

Manual shutter speed adjustment

≥ Avoid recording under fluorescent light, mercury

light or sodium light because the colour and
brightness of the playback image may change.

≥ If you increase the shutter speed manually, the

sensitivity lowers and accordingly the gain value
increases automatically, which may increase the
noises on the screen.

≥ You may see vertical lines of light in the playback

image of a brightly shining subject or highly
reflective subject, but this is not a malfunction.

≥ During normal playback, image movement may not

look smooth.

≥ When recording in an extremely bright place, the

screen may change colour or flicker. If so adjust the
shutter speed manually to [1/50] or [1/100].

Manual iris/gain adjustment

≥ If the gain value is increased, the noise on the

screen increases.

≥ Depending on the zoom magnification, there are iris

values that are not displayed.

LSQT1019(ENG).book 80 ページ 2006年2月3日 金曜日 午後4時37分

Advertising