Panasonic VDRD250EP - Instrukcja (Strona 55)

Re
cording
Recording still pictures
55
LSQT1019
Recording still pictures
(SD)
Record the still picture on an SD card.
≥ When this unit is purchased, [PICTURE SIZE] is set to [
] (VDR-D300)/[ ] (VDR-D250)
for recording pictures compatible with a wide-screen TV (16:9).
To record pictures with a 4:3 aspect ratio, change the [PICTURE SIZE] setting before recording
(l 58).
≥ (VDR-D250 only) Remove the lens cap before turning the unit on.
If the unit is turned on with the lens cap fitted, the automatic white balance adjustment may not
function properly.
1 Turn the unit on.
2 Rotate the mode dial to select .
(VDR-D300 only) The lens cover opens
automatically.
3 Open the LCD monitor or extend the viewfinder.
4 Press the PHOTO SHOT button halfway in
order to adjust focusing. (For auto focusing
only)
The shutter speed and the iris/gain value are fixed and the unit
focuses on the subject automatically.
≥ (VDR-D300 only) If you set [O.I.S.] to [ON], then the image
stabilizer function will be more effective. ([ ] (MEGA optical
image stabilizer) will be displayed.)
≥ The shutter chance mark is indicated as follows when the
PHOTO SHOT button is not pressed halfway. Please use it as a guide for recording.
2 1.7
A Shutter chance mark
± (The white lamp flashes.):
Focusing
¥ (The green lamp lights up.): When in focus
No mark: When focusing is unsuccessful.
¥ (The green lamp lights up.): When in focus and a good picture can be recorded.
± (The white lamp lights up.): Almost in focus
B Focus area
MEGA
A
B
LSQT1019(ENG).book 55 ページ ２００６年２月３日 金曜日 午後４時３７分