Panasonic VDRD250EP - Instrukcja (Strona 73)

Re
cording
Various recording functions
73
LSQT1019
(SD)
Use the built-in flash in order to record still pictures in dark places.
¬Rotate the mode dial to select .
1 Press the MENU button, then select
[ ADVANCED] > [ß FLASH] > desired item
and press the joystick.
ß: Forced flash
ßA: Auto
≥ When [ ßA] is set, the ambient brightness is automatically detected, and only when the flash is
judged necessary will it flash.
2 Press the PHOTO SHOT button.
The flash is activated and the picture will be recorded.
When the flash is not used
Press the MENU button, then select [ ADVANCED] > [ß FLASH] > [ ] and press the
joystick.
: Forced off
Built-in flash (VDR-D300 only)
≥ Do not block the flash by hand or any other means.
≥ The unit, even when its flash has been turned off,
automatically determines if the flash is necessary by
detecting the ambient brightness. (If it determines
that the flash is necessary, the [
] indication lights
up in yellow.)
≥ When the [ ß] ([ßi]/[ßj]) indication or the [ßA]
([ßAi]/[ßAj]) indication is displayed, the flash can
be lit. If the indication is flashing or not displayed,
the flash cannot be lit.
≥ The available range of the flash is approx. 1 m to
2.5 m in dark places. Pictures will appear dark or
reddish when they are recorded by using the flash
at distances greater than 2.5 m.
≥ When setting the flash to [ ßA] and adjusting the
shutter speed or iris/gain at the same time, the
indication [ßA] etc. may disappear and the flash
may not flash.
≥ Using the flash fixes the shutter speed of 1/750 or
faster to 1/500.
≥ The picture may become out of focus in dark
places. If so, adjust the focus manually.
≥ The picture may appear dark if flash is lit in front of a
white background.
≥ Set the flash to [ ] where using a flash is
prohibited.
≥ If the flash will be activated a large number of times,
it may take longer to charge it.
LSQT1019(ENG).book 73 ページ ２００６年２月３日 金曜日 午後４時３７分