Panasonic VDRD250EP - Instrukcja (Strona 47)

Se
tup
Setting date and time
47
LSQT1019
∫ Changing the date and time display style
Press the MENU button, then select [
SETUP] # [ DATE/
TIME] # desired display style and press the joystick.
You can also show or change the date and time display by repeatedly
pressing the DATE/TIME button on the remote control.
≥ The recording time is not displayed in disc playback mode.
∫ Changing the display style
Press the MENU button, then select [
SETUP] #
[ DATE FORMAT] # desired display style and press the
joystick.
[DATE] [D/T] [OFF]
Display style Y/M/D M/D/Y D/M/Y
Screen display
15:30
2006.12.15 15:30
12.15.2006 15:30
15.12.2006
15:30
15.12.2006
15.12.2006
≥ The date and time function are driven by a built-in
lithium battery.
≥ Make sure to check the time before recording.
≥ If the time display becomes [- -], the built-in lithium
battery has run down. Use the following steps to
charge the battery. When turn on the power for the
first time after charging, a message asking you to
set the date and time will appear. Select [YES] and
set the date and time.
To recharge the built-in lithium battery
Connect the AC adaptor or attach the battery to the
unit, and the built-in lithium battery will be
recharged. Leave this unit as is for approx.
24 hours, and the battery will save the date and
time for approx. 6 months. (Even if the OFF/ON
switch is set to OFF, the battery is still being
recharged.)
LSQT1019(ENG).book 47 ページ ２００６年２月３日 金曜日 午後４時３７分