Panasonic VDRD250EP - Instrukcja (Strona 79)

Re
cording
Manual recording functions
79
LSQT1019
1 Select [ ], fill the screen with a white subject.
2 Move the joystick up to select [ ].
When the [ ] display changes from flashing to on, setting is
complete.
≥ When the [ ] display continues flashing green, the white balance
cannot be set because the place is dark etc. In this case, use the
automatic white balance.
∫ About the white balance sensor A
The white balance sensor detects the type of light source during recording.
Do not cover the white balance sensor during recording, or it may not
function properly.
∫ About the black balance adjustment
This is one of the 3CCD system functions that automatically adjusts the black when the white
balance is set in the manual adjustment mode. When the black balance is adjusted, the screen will
temporarily be black. (The black balance cannot be adjusted manually.)
1 Black balance adjustment in progress. (Flashes.)
2 White balance adjustment in progress. (Flashes.)
3 Adjustment completed. (Lights up.)
To set the white balance manually
MNL
BACK
MNL
BACK
A
1 2 3
≥ When the [ ] display flashes white, the manual
white balance previously adjusted is stored.
Whenever recording conditions change, re-set the
white balance for correct adjustment.
≥ When setting both the white balance and the iris/
gain, set the white balance first.
≥ (VDR-D250 only) When the unit is turned on with
the lens cap fitted, the automatic white balance
adjustment may not function properly. Please turn
the unit on after removing the lens cap.
LSQT1019(ENG).book 79 ページ ２００６年２月３日 金曜日 午後４時３７分