Timeshift recording, Instant recording – Orion 32LBT906D Instrukcja Obsługi

Strona 58

Advertising

English - 57 -

You can set your Media Browser preferences by
using the Settings dialog. Press “ ” or “ ” button to
highlight an item and use “ ” or “ ” button to set.
View Style: Sets default browsing mode.
Music FF/FR Speed: Sets forwarding/advancing
speed.
Slide Show Interval: Sets slide show interval time.
Show Subtitle: Sets subtitle enabling preference.
Subtitle Position: Sets subtitle position as up or
down.
Subtitle Font Size: Sets subtitle font size (max.
54pt).

Timeshift Recording

IMPORTANT: To record a programme, you should
fi rst connect a USB disk to your TV while the TV is
switched off. You should then switch on the TV to
enable recording feature. Otherwise, recording feature
will not be available.
• Press (PAUSE) button while watching a broadcast

for switching to timeshifting mode.

• In timeshifting mode, the programme is paused and

simultaneously recorded to the connected USB
disk (*). Press (PLAY) button again to watch the
paused programme from the stopped moment.

• This playback is performed in x1 playback speed.

You will see the timeshift gap between the real and
the timeshifted programme in the info bar.

• Use

(PREVIOUS/NEXT) buttons to move

forward or backward on timeshift playback. When
the timeshift is reached, timeshifting mode will be
quitted and you will switch back to watching normal
broadcast.

• Press (STOP) button to quit timeshifting mode.
(*) Similtaneous timeshifting recording’s duration
depends on your connected USB disk’s file size
and defined Max. Timeshift in the Recordings
Confi guration menu. See the section, “Recordings”
for more information on setting Max. Timeshift.
Note: Switching to a different broadcast or source;
and viewing main menu are not available during the
timeshifting.
Lip Sync delay may occur during the timeshifting.

Instant Recording

(RECORD) button to start recording an

event instantly while watching a programme. The
following OSD appears on the screen:

• Record OSD will then be displayed for a short time

and the current event will be recorded.

• You can press

(RECORD) button on the remote

control again to record the next event on the EPG. In
this case, OSD will display the programmed events
for recording.

Press (STOP) button to cancel instant recording.
The following OSD will be displayed:

Select Yes by using “ ” or “ ” / OK buttons to cancel
instant recording.
Note: Switching to a different broadcast or source;
and viewing Media Browser are not available during
the recording.

02_MB62_[GB]_woypbpr_IDTV_TC_NICKEL17_5110UK_32906W_10081597_50231723.indd 57

28.09.2012 13:21:46

Advertising