Viewing the connections - side connectors, Power connection, Aerial connection – Orion 32LBT906D Instrukcja Obsługi

Strona 45

Advertising

English - 44 -

Note: When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not
be available via the scart socket.

5. VGA

Input is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.

6. SPDIF

Out outputs audio signals of the currently watched source.

Use an SPDIF cable to trasfer audio signals to a device that has SPDIF input.

Viewing the Connections - Side Connectors

1. The CI Slot is used for inserting a CI card. A CI card allows you to view all the channels

that you subscribe to. For more information, see “Conditional Access” section.

2. Side USB input.
3. Video Input is used for connecting video signals of external devices.Connect the video

cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.

4. Audio Inputs are used for connecting audio signals of external devices. Connect the audio

cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your device.

Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect your
device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
5. The headphone jack is used for connecting an external headphone to the system.

Connect to the HEADPHONE jack to listen to the TV from headphones.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the

mains. Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial ,cable TV plug to the AERIAL INPUT (ANT) socket located at the rear of the TV.

SPDIF

Coax.OUT

Aerial or Cable

02_MB62_[GB]_woypbpr_IDTV_TC_NICKEL17_5110UK_32906W_10081597_50231723.indd 44

28.09.2012 13:21:38

Advertising