Installation, Manual tuning – Orion 32LBT906D Instrukcja Obsługi

Strona 52

Advertising

English - 51 -

broadcasts.When fi nished, press OK button to start
automatic search.
If you select AERIAL option from the Search Type
screen, the television will search for digital terrestrial
TV broadcasts.

• Note: You can press “MENU” button to cancel.
• After all the available stations are stored, Channel

List will be displayed on the screen. If you like the
sort channels, according to the LCN, please select
“Yes” and than press “OK”.

• Press OK button to quit channel list and watch TV.

Installation

Press MENU button on the remote control and
select Installation by using “ ” or “ ” button. Press
OK button and the following menu screen will be
displayed.

Select Automatic Channel Scan (Retune) by using “
”/“ ” button and press OK button. Automatic Channel
Scan (Retune) options will be displayed. You can
select options by using “ ”/“ ” and OK buttons.

Auto Channel Scan (Retune) Menu
Operation

Analogue: Searches and stores analogue stations.
Digital & Analogue: Searches and stores both
analogue and aerial DVB stations.
• Whenever you select an automatic search type and

press OK button, a confi rmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using .“ ” or “ ” and
OK button.

• After the auto channel scan type is set and selected

and confi rmed, the installation process will start and
the progress bar will move along. Press “MENU”
button to cancel process. Located channels are not
stored if the process is cancelled.

Manual Tuning

HINT: This feature can be used for direct broadcast
entry.
• Select Manual Channel Scan from the Installation

menu by using “ ”/“ ” and OK buttons. Manual
Scan options screen will be displayed.

• Select the desired Search Type using “ ” or “

” button. Manual search options will change

accordingly. Use “ ”/“ ” button to highlight an item
and then press “ ” or “ ” button to set an option.
You can press “MENU” button to cancel.

Manual Search

In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital, you can enter
the multiplex or frequency number using the numeric
buttons and press OK button to search.

Digital Cable Manual Search

In cable manual scan, you can enter frequency,
modulation, symbol rate and network channel scan
options. After selecting search type as Digital Cable,
you can set the desired options and press OK button
to search.

02_MB62_[GB]_woypbpr_IDTV_TC_NICKEL17_5110UK_32906W_10081597_50231723.indd 51

28.09.2012 13:21:41

Advertising