Hoefer HB1000 - Instrukcja (Strona 15)

Operating instructions
Using the Hybridization Oven
1
Place the unit on a level work surface and provide
adequate room in front of the door for easy access,
as well as the back for air ventilation.
2
Plug the female end of the power cord into the back
of the oven.
3
To turn on the main power supply, press the Power
ON/OFF switch located on the right side of the control
panel to the ON position.
4
To adjust the temperature setting, press either the UP
or DOWN arrow buttons located below the Tempera-
ture Control display to raise or lower the displayed
value (degrees Celsius). This setting is adjustable from
+10 °C over ambient up to 99.9 °C. See “Setting the
temperature controls” (page 7) for more details.
5
To turn on the motor for the bottle holder carousel,
press the Motor Control ON/OFF switch to the
ON position.
6
To adjust the bottle holder carousel to the desired
RPM, turn the Motor Control knob clockwise to
increase the RPM and counterclockwise to decrease
the RPM.
Minimum RPM = OFF/10
Maximum RPM = 18
•
p6
RPM Control Motor ON/OFF Temp setting Main ON/OFF