Hoefer HB1000 - Instrukcja (Strona 14)

Installing the optional rocker tray
1
Remove the bottle holder carousel from the chamber.
2
Position the rocker tray in the chamber so that the
coupling arm is located on the right side.
3
Place the coupling sleeve over the motor drive
shaft so that the pins on the inside of the coupling
sleeve engage the slots in the motor drive shaft of
the chamber.
4
Rotate the sleeve counter-clockwise 30° until locked
into place.
5
To remove the tray, reverse the process.
•
p5
Fig 4. The optional rocker tray .
coupling sleeve