Hoefer HB1000 - Instrukcja (Strona 11)

WARNING!
There may be build up of pressure within the hybrid-
ization bottles when they are taken from ambient to
hybridization temperature. To help in relieving some of
this pressure, preheat the solutions and bottles. Also,
be sure bottles are opened at the same temperature
at which the hybridization was done. Do not allow the
bottles to cool before opening.
To assure hybridization bottles remain leakproof and
pressure proof, do not hybridize at temperatures above
70 °C. If temperatures above this are used without
first relieving the pressure within the bottle, there is
a risk that bottles will leak and/or break due to the
internal pressure build up.
If the bottles are accidentally taken above 70 °C with-
out relieving the pressure, DO NOT open the hybrid-
izer door. Turn off the hybridizer and allow it to cool
before opening the door and checking the contents
of the oven. Should the bottles be used above 70 °C,
relieve the pressure by unscrewing and re-tightening
the cap.
If using radioactive material see Decontamination
(page 8).
•
p2