Hoefer HB1000 - Instrukcja (Strona 10)

Introduction
The Hoefer ® HB1000 Hybridization Oven is
a cost-effective, high-performance, 10-bottle
hybridization oven with state-of-the-art micro-
processor temperature and variable speed
controls.
The HB1000 Hybridization Oven can be set to
operate anywhere from 10 to 18 RPM, enabling
consistent saturation of samples, whether it be
for washing or hybridizing. Having the ability to
remove the bottle holder carousel and replace it
with an interchangeable rocker plate enables all
hybridization protocols in one reliable benchtop
unit. An easily removable protective tray under
the carousel allows easy clean up of spilled media.
A touch sensitive keypad and microprocessor
provide accurate temperature control from
+10 °C over ambient up to 99.9 °C. The keypad
is located just below a large LED readout. Once
the desired hybridization temperature is entered,
the readout displays the current temperature
inside the chamber. The chamber environment
is calibrated at 68.0 °C ; at this temperature, the
accuracy is ±0.5 °C. An internal circulating fan
assists uniform distribution of heating through-
out the chamber.
Two different hybridization bottle sizes are
available for use within the hybridizer using the
standard bottle holder carousel provided with the
unit. The bottle holder carousel can hold up to
twenty (20) 35 × 150 mm bottles or ten (10)
35 × 300 mm bottles. In addition, combinations
of both size bottles may be used at the same time.
•
p1
IMPORTANT! Please read
these instructions before
operating your Hybridization
Oven to familiarize yourself with
operation procedures.