Ivoclar Vivadent Bluephase v.4 - Instrukcja (Strona 15)

15
Warranty /
Procedure in case of repair Product specifications
The warranty period for bluephase is 3 years from the
date of purchase (battery 1 year).
Malfunctions resulting from faulty material or manufac-
turing errors are repaired free of charge during the war-
ranty period. The warranty does not provide the right to
recover any material or non-material damage other than
the ones mentioned. The apparatus must only be used for
the intended purposes. Any other uses are contraindicat-
ed. The manufacturer does not accept any liability result-
ing from misuse and warranty claims cannot be accepted
in such cases. This is particularly valid for:
– damage resulting from improper handling, especially
incorrectly stored batteries (see Technical data:
Transportation and storage conditions).
– damage to components resulting from wear under
standard operating conditions (e.g. battery).
– damage resulting from external influences, e.g. blows,
drop to the floor.
– damage resulting from incorrect set-up or installation.
– damage resulting from connecting the unit to a power
supply, the voltage and frequency of which do not
comply with the ones stated on the rating plate.
– damage resulting from improper repairs or modifica-
tions that have not been carried out by certified
Service Centers.
In case of a claim under warranty, the complete
apparatus (handpiece, charging base, power cord, and
power pack) must be returned, carriage paid, to the
dealer or directly to Ivoclar Vivadent, together with the
purchase document. Use the original packaging with the
corresponding cardboard inserts for transportation.
Repair work may only be carried out by a certified
Ivoclar Vivadent Service Center. In case of a defect that
cannot be rectified, please contact your dealer or your
local Service Center (see addresses on the reverse side).
A clear description of the defect or the conditions under
which the defect occurred will facilitate locating the
problem. Please enclose this description when returning
the apparatus.
Delivery form
1 Charging base, 1 Power cord, 1 Power pack,
1 Handpiece, 1 Battery (Li-Po), 1 10 mm light probe,
3 Anti-glare cones, Sleeves, 1 Set of Operating Instructions
Accessories
The following accessories are available for bluephase:
REF Description
608537 Light probe 10 mm, black (G2)
608538 Pin-point light probe 6>2 mm, black
551756 Anti-glare cones
592496 Anti-glare shield
608534 bluephase charging base (G2)
608535 bluephase battery (G2)
608532 bluephase handpiece (G2)
607922 bluephase meter
608554 bluephase sleeves (G2)
Technical data
Operating voltage charging base 5 VDC
Operating voltage handpiece 3.7 VDC with battery
5 VDC with power pack
Power pack 100–240 VAC / 50-60 Hz /
max. 0.4 A
Fabricant: Friwo
Output 5 VDC
TYPE 15.2630
Operating conditions
Temperature +10 °C to +40 °C
(+50 to +104 °F)
Relative humidity 30% to 75%
Ambient pressure 700 hPa to 1060 hPa
Dimensions of the charging base L=205mm W=150mm H=85mm
Weight of the charging base 250 g
Charging time approx. 2 h (with the battery empty)
Power supply of the handpiece Li-Po battery
Max. battery time approx. 60 min.
(with a new, fully charged battery)
Light source 5W LED
Wavelength range 385 – 515 nm
Light intensity max. 1,200 mW/cm2 ± 10 %
Operating 6 min. on / 4 min. off (intermittently)
Dimensions of the handpiece: L=260mm W=42mm H=120 mm
Weight of the handpiece 245 g
(incl. battery)
Transportation and storage conditions:
Temperature -20 °C to +60 °C (-4 to 140 °F)
Relative humidity 10% to 75%
Ambient pressure 500 hPa to 1060 hPa
bluephase has to be stored in closed, roofed rooms.
Protect the device from severe jarring.
Battery
– Do not store at temperatures above 40 °C / 104 °F
(or 60 °C / 140 °F for a short period).
Recommended storage temperature 15 – 30 °C (59 – 86 °F).
– Always store the battery charged and not for longer than 6 months.