Ivoclar Vivadent Bluephase v.4 - Instrukcja (Strona 14)

14
What if....?
Symbol Causes Error Rectification
Electronic defect in the handpiece
or battery
Apparatus is overheated or
undercooled
Electronic defect in the battery
Battery empty
Charging contacts contaminated
Battery in safety mode
(integrated protective circuit)
Power pack not connected or
defective
Remove and reinsert the battery. If the error remains, replace
the battery with the power pack (Click & Cure).
If the error remains, please contact your dealer or your local
Service Center.
Allow the apparatus to cool down (or assume room tempera-
ture if it is undercooled) and try again after a certain time.
If the error remains, please contact your dealer or your local
Service Center.
Remove and reinsert the battery. If the error remains, place the
apparatus into the charging base.
If the error remains nonetheless, replace the battery with the
power pack (Click & Cure).
Please contact your dealer or your local Service Center.
Position the handpiece in the charging base. „Charging
Battery“ briefly appears in the display before the display
returns to the stand-by mode. If the battery is not charged, the
contacts have to be cleaned. If the error remains, please con-
tact your dealer or your local Service Center.
Check if the handpiece has been correctly placed into the
charging base. Clean battery contacts. Information: „Charging
Battery“ briefly appears in the display before the display
returns to the stand-by mode.
If cleaning the battery contacts does not improve the results,
remove the battery from the apparatus. Charge the battery
separately from the handpiece in the charging base for
approx. 10 minutes.
If the error remains, please contact your dealer or your local
Service Center.
Check if the power pack is correctly positioned in the charging
base (also check the charging contacts) or if the power pack is
connected to the power supply by means of the power cord
(display on the power pack lights up in green if it works cor-
rectly).
If the error remains, please contact your dealer or your local
Service Center.
No display
during
charging
LED of the
charging
base is not
illuminated