Panasonic NVGS75EP - Instrukcja (Strona 7)

Before using
7
VQT0P93
The one-touch free-style grip belt
ª To use as a hand strap
If you use the grip belt as a hand strap, then you
can carry or handle this camera more easily.
1 Open the lock cover 1 by pinching the
projections 2 on both sides. Press the lock
button 3 to remove the grip belt.
≥When removing the grip belt, tightly hold the
camera with both hands.
≥After removing the grip belt, restore the lock
cover to the original position.
2 Adjust the belt length.
1 Flip the belt.
2 Slide 1 in the direction indicated by the arrow.
3 Fix the belt.
3 Put your hand through the strap.
≥Use the free style remote control for more
convenience.
≥Hold the movie camera not to cover the
microphones or the sensors with your hands.
ª To restore the strap to the grip belt
≥When returning the grip belt to the grip belt
attachment part, press the lock cover 1 and
check if the grip belt is securely locked.
ª To use as a grip belt
Adjust the belt length so it fits your hand.
1 Adjust the belt length and the pad position.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
Using the LCD monitor
You can record the image while viewing it on the
LCD monitor opened.
1 Put a finger on the LCD monitor open part
and pull the LCD monitor out in the
direction of the arrow.
≥The viewfinder will go off.
≥It can open up to 90o.
2 Adjust the angle of the LCD monitor as you
prefer.
≥It can rotate up to 180o 1 towards the lens or
90 o 2 towards the viewfinder.
≥The brightness and colour level of the LCD
monitor can be adjusted from the menu.
≥If it is forcibly opened or rotated, the camera
may be damaged or fail.
≥Check that the card slot cover is closed.
≥When the LCD monitor is rotated by 180o
towards the lens (when recording yourself), the
LCD monitor and the viewfinder will be
simultaneously activated.
2
1 3
1 3
1
2
1
1 3
2
1 180o 2 90o
GS75EP.book 7 ページ ２００４年１２月１７日 金曜日 午前１０時４２分