Panasonic NVGS75EP - Instrukcja (Strona 46)

Others
46
VQT0P93
NO PAPER IN PRINTER:
There is no paper. Check the connected
printer.
PRINTER ERROR:
Check the connected printer.
PC DOES NOT SUPPORT USB 2.0:
The movie camera is connected to a
personal computer that does not support
USB 2.0.
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
CAN NOT OPERATE (MOTION DV MODE):
You are attempting to change [D.ZOOM]
setting during MotionDV Mode.
REVERSE THE LCD MONITOR:
At the time of 0 Lux night view mode, when
LCD monitor is not reversed, it displays.
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
Functions cannot be used
simultaneously
Some functions in the movie camera are disabled
or cannot be selected due to its specifications.
The table below shows examples of functions
restricted by conditions.
Functions Conditions which disable
the functions
≥Progressive ≥When recording onto a
tape and a card
simultaneously
≥When digital zoom
(10 k or higher) is used
≥When the shutter speed is
1/750 or faster in Tape
Recording Mode
≥When the gain value is
increased in Tape
Recording Mode
≥When the colour night
view function is used
≥When the portrait mode of
the scene mode is used in
Tape Recording Mode
≥Digital zoom
≥Fade ≥When the Card Recording
mode is used
≥Image stabilizer ≥When the Card Recording
mode is used
≥When the colour night
view function is used
≥Backlight
compensation
≥When the iris/gain is set
≥When the colour night
view function is used
≥Soft skin
≥Tele-macro
≥Recording
check
≥While recording to a tape
≥Colour Night
View
≥While recording to a tape
≥When the Card Recording
mode is used
≥Continuous
Photoshot
≥When [PICTURE SIZE] is
set to other than [640]
≥Zoom
microphone
≥Wind noise
reduction
≥An external microphone is
used
GS75EP.book 46 ページ ２００４年１２月１７日 金曜日 午前１０時４２分