Panasonic NVGS75EP - Instrukcja (Strona 33)

Playback mode
33
VQT0P93
Playback on TV
Images recorded by this camera can be played
back on a TV.
≥Insert a recorded tape into this camera.
1 Connect the movie camera and a TV.
≥Connect the movie camera and a TV by using
the AV cable 1.
≥If the TV has an S-Video terminal, then also
connect an S-Video cable 2 (optional). It
allows you to enjoy more beautiful images.
2 Turn on this camera and set the mode dial
to the Tape Playback Mode.
3 Select the input channel on the TV.
4 Move the joystick up to select the [ 1/;]
icon to start playback.
≥The image and audio are output on the TV.
5 Move the joystick down to select the [ ∫]
icon to stop playback.
≥Whenever plugging in the S-Video cable, plug in
the AV cable, too.
≥Use the AC adaptor to free you from worrying
about the battery running down.
ª If the image or audio from this camera
is not output on the TV
≥Check that the plugs are inserted as far as they
go.
≥Check the connected terminal.
≥If the image does not appear on the TV even if
[BASIC] >> [AV JACK] >> [OUT/ Ë] are set,
then set to [OUT]. ( -42- )
≥Check the TV’s input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
ª To display the on-screen information
on the TV
The information displayed on the LCD monitor or
the viewfinder (operation icon, time code and
mode indication, etc.), date and time can be
displayed on the TV.
1 Press the [OSD] button on the remote
control.
≥Press the button again to erase the OSD
information.
Playing back card
≥Set to Picture Playback Mode.
1 Operate with joystick.
E
: Plays back the previous picture.
D
: Plays back the next picture.
1/∫: Slide show (Plays back the still pictures
on the card in order) start/stop
≥While the data on a card are played back, do
not operate the mode dial.
≥When the access lamp is lit, do not insert or
remove a card.
≥It takes time to display the file depending on the
number of pixels of the file.
≥If you attempt to play back file recorded in a
different format or file data is defective, the
whole display becomes bluish and the
“UNPLAYABLE CARD’’ indication may appear
as warning.
≥When playing back a file recorded on other
equipment, the date and time display is different
from when it was recorded.
≥When playing back a picture recorded on other
equipment, its size and that of this movie
camera may appear differently.
1 2
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
AV/
S-VIDEO
OSD
DATE/
TIME
ZOOM
PHOTO
SHOT
START/
STOP
PC
GS75EP.book 33 ページ ２００４年１２月１７日 金曜日 午前１０時４２分