Soft skin mode, Tele-macro function, Fade in/fade out function – Panasonic NVGS75EP Instrukcja Obsługi

Strona 24

Advertising
background image

Record mode

24

VQT0P93

Soft skin mode

This allows the skin colour to be recorded in a
softer tone. This is more effective if you record the
bust image of a person.
Set to Tape/Card Recording Mode.

1

Press the joystick until the icon

1 appears.

2

Move the joystick down to select the soft
skin icon [

].

ª

To cancel the soft skin mode

Select the [

] icon again.

≥If the background or anything else in the scene

has colours similar to the skin colour, they will
also be smoothed.

≥If the brightness is insufficient, the effect may

not be clear.

Tele-macro function

By focusing only on the subject and blurring the
background, the image can be impressive. This
camera can focus on the subject at a distance of
approx. 40 cm.
Set to Tape/Card Recording Mode.

1

Press the joystick until the icon

1 appears.

2

Move the joystick up to select the
tele-macro icon [

].

≥If the magnification is 10k or less, then it is

automatically set to 10

k.

ª

To cancel the tele-macro function

Select the [

] icon again.

≥If a sharper focus cannot be achieved, adjust

the focus manually.

≥In the following cases, the tele-macro function is

cancelled.

≥The zoom magnification becomes lower than

10

k.

≥The [OFF/ON] switch or the mode dial is

operated.

Fade in/fade out function

Fade in
The image and audio gradually appear.
Fade out
The image and audio gradually disappear.
Set to Tape Recording Mode.

1

Press the joystick until the icon

1 appears.

2

Move the joystick left to select the fade icon
[

].

3

Press the recording start/stop button.

Start recording. (fade in)
When you start recording, the image/audio
disappeared completely and the image/audio
gradually appears.

Pause recording. (fade out)
The image/audio gradually disappears. After the
image/audio completely disappears, recording
stops.

ª

To cancel fading

Select the [

] icon again.

ª

To select the colour for fade in/out

The colour which appears in fading pictures can
be selected.

1

Set [SETUP] >> [FADE COLOUR] >>
[WHITE] or [BLACK].

≥While the fade in/fade out function is selected, it

takes several seconds to display the image
when you start recording images. Besides, it
also takes several seconds to pause recording.

1

1

1

B

GS75EP.book 24 ページ 2004年12月17日 金曜日 午前10時42分

Advertising