Sony KDL-40ZX1 - Instrukcja (Strona 46)

46 GB
Monitor Set-up
Power Saving Reduces the power consumption by adjusting the backlight brightness. This also
enhances the black level. Select from “Off”, “Low”, “High” and “Picture Off”.
Light Sensor On Automatically optimises the picture settings according to the
ambient light in the room.
Off Turns off the “Light Sensor” feature.
~
• Be sure not to put anything over the sensor, as its function may be affected. See
page 22 for the location of the light sensor.
• Depending on the “Picture Mode” and “Power Saving” settings, the effect of
“Light Sensor” may vary.
Product Information Displays your monitor’s product information.
Remote Control Set-
up Registers a remote to the unit, otherwise the remote cannot be used with the unit.
Instruction screens appear if you register or delete a remote. Follow the
instructions to register or delete.
~
• The remote can only be registered to only one unit.
• When registering a remote, move the remote as close as possible to the bottom
right of the monitor front.
Wireless Channel
Set-up Wireless
Channel
Selection Selects a wireless channel from “Auto”, “36ch”, “40ch”,
“44ch” or “48ch”.
If the wireless channel is uncertain, select “Auto” to search
an available channel.
Wireless
Information Displays information about the current wireless channel and
link level.
Language Selects the language in which the menus are displayed.
PC Settings
Screen Format Selects a screen format for displaying input from your PC.
Normal Displays the picture in its original size.
Full 1 Enlarges the picture to fill the vertical display area, keeping
its original horizontal-to-vertical aspect ratio.
Full 2 Enlarges the picture to fill the display area.
Reset Resets the PC screen settings to the factory settings.
Horizontal Shift Adjusts the horizontal position of the picture.
Vertical Shift Adjusts the vertical position of the picture.