Sony KDL-40ZX1 - Instrukcja (Strona 35)

35 GB
Using
MENU F
uncti
ons
AV Set-up AV Preset Assigns a name to any equipment connected to the media
receiver. The name will be displayed briefly on the screen
when the equipment is selected. You can skip an input source
that is not connected to any equipment.
1
Press F/f to select the desired input source, then press
.
2
Press F/f to select the desired option below, then press
.
-, CABLE, SAT,
VCR, DVD/BD,
GAME, AUDIO
SYSTEM, CAM,
PC Uses one of the preset labels to assign a
name to connected equipment.
Edit: Creates your own label.
1
Press F/f to select the desired letter
or number (“_” for a blank space),
then press
g.
If you input a wrong character
Press
G/g to select the wrong
character. Then, press F/f to select
the correct character.
2
Repeat the procedure in step 1 until
the name is completed.
3
Select “OK”, then press .
Skip Skips an input source that is not
connected to any equipment when you
press
F/f to select the input source.
Speaker Turns on/off the unit speakers.
TV Speaker The unit speakers are turned on in order
to listen to the TV’s sound through them.
Audio System The unit speakers are turned off in order
to listen to the TV’s sound only through
your external audio equipment connected
to the audio output sockets. When
connected with “Control for HDMI”
compatible equipment, you can turn the
connected equipment on interlocked with
the monitor. This setting must be made
after connecting the equipment.
Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast.
Stereo/Mono For a stereo broadcast.
A/B/Mono For a bilingual broadcast, select “A” for sound channel 1, “B”
for sound channel 2, or “Mono” for a mono channel, if
available.
z
• If you select other equipment connected to the unit, set “Dual Sound” to
“Stereo”, “A” or “B”.
IR Blaster Set-up See page 12 for the “IR Blaster Set-up” setting.
(Continued)