Samsung DSB-H370 - Instrukcja (Strona 35)

GB-19
DSB-H370G
GB
OPERATING THE RECEIVER
Main Menu
After installing your antenna system and STB with appropriate
connectors.
● Plug in the AC main power and switch on the receiver.
● Press the MENU key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed.
For the sub-menus Installation, Channel Organization and
Parental Lock, you need the PIN Code.
Before you begin with the “Installation” menu,
you should check in the 3rd menu “System Setup”
whether all the information there is applicable for you.
1. Channel Organising
The “Channel Organising” menu has six functions:
This menu is for removing some channels from channel list
which are related with designated Satellite or Transponder.
And it provides making favorite list and moving channel position
as you want.
● Enter the PIN Code.
If you have not entered your own PIN Code, the PIN Code 0000
applies which was set at the factory.
7. Teletext VBI
When the current broadcasting program provides Teletext VBI,
press the TEXT key to see the current language list
for Teletext.
This Teletext will be displayed to the screen by TV, which
supports Teletext.
at the right corner on the banner shows that Teletext is
available on this event(program). Even is displayed on the
banner, Teletext may not be available due to broadcasting
To change the Teletext VBI:
● Use the œ/ƒ¤keys to select language of Teletext VBI you
want.
● Press the OK key and then the language of Teletext VBI you
want is selected.
8. Audio Mode
You can choose a mode among left, right or stereo using the
AUDIO key.
To change the audio mode:
● Press the AUDIO key to select the left, right or stereo.
● Press the EXIT key to save and escape from this menu.
GB-18 D I G I T A L S A T E L L I T E R E C E I V E R
DSB-H370G
CONNECTING YOUR “STB”
00431A_H370G_POL_EngV2 8/10/07 3:23 PM Page 18