Samsung DSB-H370 - Instrukcja (Strona 30)

Enter the manufacturer number into the remote control to control the TV with the remote control
(see “Available TV Manufacturer Numbers” on pages 32~39).
1. Turn the TV on.
2. Point the remote control towards the TV.
3. Enter the TV manufacturer number by using the NUMERICAL keys while pressing the TV key.
E.g. For a Samsung TV, press 0, 0 and 1 in this order by using the NUMERICAL keys while
pressing the TV key.
4. When the TV is turned off or on, the configuration is finished.
TV functions that you can control with the remote control
N No otte e : 1. There is a model that can only be turned on by pressing the numeric key ‘0’ on
the remote control.
2. TV models of other manufacturer that can be controlled with the remote control
are limited, and some functions may not work.
3. If you replace the remote control batteries or enter a new manufacturer number,
the previously configured TV manufacturer number is deleted.
4. When a connected device is an integrated TV model (VCR, DVDP), take care
when using the remote control because it may operate both of them
simultaneously.
5. If the configuration number does not work, try another number.
Button key Function
TV STANDBY/ON Press to turn the TV on or off.
INPUT SEL Press to select an external input source for the TV.
VOL+/VOL- Press to adjust the TV volume / Exclusive to the TV
CH /CH Press to select a TV channel.
MUTE Press to mute the TV sound.
0~9 Press to select TV channel.
GB-9
DSB-H370G
GB
CONNECTING YOUR “STB”
GB-8 D I G I T A L S A T E L L I T E R E C E I V E R
DSB-H370G
CONNECTING YOUR “STB”
Resolution and Video Output
N No otte e : - Default resolution of YPbPr,HDMI is 576P.
- While TV-> SCART(RGB) is selected, YPbPr output is not supported.
- Depend on TV, video quality can be different.
You can select the appropriate video output for the connected TV or monitor mode.
To select the resolution:
● Select a resolution by using the RESOLUTION key on the
remote control and referring to the following table.
To select the video output signal:
● Select the output signal by using the VIDEO OUTPUT key on
the remote control and referring to the following table.
N No otte e : If TV doesn't support specific HD resolutions, TV can not display
properly.
Selecting the Resolution and the DTV Output Signal Setting Up TV Operations with the Remote Control
CVBS
S-Video
576i
RGB
YUV
1080i/720p/576p
1080i/720p/576p
SCART
Component (Y,Pb,Pr)
HDMI
SCART output can be selected as
CVBS, S-Video, RGB, YUV.
The 576i resolution is not supported.
The 576i resolution is not supported.
Video Out Available Resolution Output Status
00431A_H370G_POL_EngV2 8/10/07 3:23 PM Page 8