Description, Front panel, Rear panel – Samsung DSB-H370 Instrukcja Obsługi
Strona 31
Front Panel
1.
This key is used to turn the receiver on and off (Standby).
2. STANDBY
It's brightness is different on status (operation mode : weak blue,
standby mode : bright blue)
3. CH+/CH-
These keys are used to change the channels.
4. TV/Radio
This key is used to toggle between TV and radio chanels.
5. Infrared Sensor
This is to receive the IR commands from the Remote Control Unit.
6. Card Slot
Slot for smartcard.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
STANDBY
1
3
2
4
5
6
1
3
2
5
4
6
7
Rear Panel
1. DISH INPUT
This port is to connect the coaxial cable from LNB of your dish.
The IF input is provided through this port and the input frequency
range is 950-2150 MHz. Also the voltage switching 13V and
18V is passed through this port.
2. AUDIO L/R
These RCA connectors are for connecting any external audio.
3. DTV OUT (COMPONENT)
These RCA connectors are for connecting to a TV, monitor or other
external display device through the Component Video IN (YPbPr).
4. HDMI OUT
Use the HDMI cable to connect this jack on your television for the best
quality picture.
5. AV1 (TV)
This is for connecting to your TV.
YUV and RGB format is supported.
6. AV2 (EXT)
This is for connecting to your VCR or other equipment.
7. DIGITAL AUDIO OUT (OPTICAL)
Output for connection to a digital amplifier.
GB-11
DSB-H370G
GB
DESCRIPTION
DESCRIPTION
GB-10
D I G I T A L S A T E L L I T E R E C E I V E R
DSB-H370G
00431A_H370G_POL_EngV2 8/10/07 3:23 PM Page 10