Samsung DSB-H370 Instrukcja Obsługi
Strona 34
GB-17
DSB-H370G
GB
BASIC FUNCTIONS
6. EPG (Electronic Program Guide)
EPG-Electronic Program Guide
The electronic program guide gives you a channel list for the
channels.
N
No
otte
e
: 1. This service depends on service provider.
2. After receiver recognized the GMT-time from the signal
which takes few seconds, it can display correct EPG
information.
●
Press the GUIDE key while you are viewing a program.
This function is displayed on the screen by using only time.
●
GREEN key: Green key is for moving back to the previous date.
●
YELLOW key: Yellow key is for moving to the next coming date.
●
BLUE key can be used for page up, if there is more information than one page.
●
RED key can be used for page down, if there is more information than one page..
Time interval can be adjusted by press keys as followings on EPG screen:
1 Key: 1 hour and 30 minutes
2 key: 30 minutes
3 key: 15 minutes
●
Select the channel by pressing the
/ keys and press the OK key to watch this channel.
●
When the TIMER key on the remote control is pressed in the EPG screen, if the current
channel involves an event, timer is set immediately and the set timer is indicated on the EPG
screen. A program that has been set in this way is indicated on Timer Field of Time & Timer
Setting.
5.1 Service Favorites
●
Press the GREEN key on the remote control unit to
select the Favorites list.
●
Press the GREEN key to switch between favorite list
and channel list.
●
Use the
/keys to select a favorite group or a channel that
you want.
5.2 Service Alphabetical
●
Press the YELLOW key on the remote control unit to
select the Alphabetical list.
●
Press the YELLOW key to switch between alphabet list
and channel list.
●
Use the
/keys to select a Alphabetical group or a channel
that you want.
5.3 Service Provider
●
Press the BLUE key on the remote control unit to
select the Provider list.
●
Press the BLUE key to switch between Provider list
and channel list.
●
Use the
/keys to select a Provider group or a channel
that you want.
5.4 Service Transponder
●
Press the RED key on the remote control unit to select the
Transponder list.
●
Press the RED key to switch between Transponder list
and channel list.
●
Use the
/keys to select a Transponder group or a channel
that you want.
GB-16
D I G I T A L S A T E L L I T E R E C E I V E R
DSB-H370G
BASIC FUNCTIONS
00431A_H370G_POL_EngV2 8/10/07 3:23 PM Page 16