Ivoclar Vivadent Bluephase v.1 - Instrukcja (Strona 15)

15
Warranty / Procedure in Case
of Repair
Product Specifications
The warranty period for bluephase style is 3 years from
the date of purchase (battery: 1 year). Malfunctions
resulting from faulty material or manufacturing errors are
repaired free of charge during the warranty period. The
warranty does not provide the right to recover any
material or non-material damage other than the ones
mentioned. The apparatus must only be used for the
intended purposes. Any other uses are contraindicated.
The manufacturer does not accept any liability resulting
from misuse and warranty claims cannot be accepted in
such cases. This is particularly valid for:
– Damage resulting from improper handling, especially
incorrectly stored batteries (see Product Specifications:
Transportation and storage conditions).
– Damage to components resulting from wear under
standard operating conditions (e.g. battery).
– Damage resulting from external influences, e.g. blows,
drop to the floor.
– Damage resulting from incorrect set-up or installation.
– Damage resulting from connecting the unit to a power
supply, the voltage and frequency of which do not
comply with the ones stated on the rating plate.
– Damage resulting from improper repairs or modifica-
tions that have not been carried out by certified Service
Centres.
In case of a claim under warranty, the complete
apparatus (handpiece, charging base, power cord and
power pack) must be returned, carriage paid, to the
dealer or directly to Ivoclar Vivadent, together with the
purchase document. Use the original packaging with the
corresponding cardboard inserts for transportation.
Repair work may only be carried out by a certified Ivoclar
Vivadent Service Centre. In case of a defect that cannot
be rectified, please contact your dealer or your local
Service Centre (see addresses on the reverse side). A
clear description of the defect or the conditions under
which the defect occurred will facilitate locating the
problem. Please enclose this description when returning
the apparatus.
Light source Ivoclar Vivadent polywave ® LED
Wavelength range 385 – 515 nm
Light intensity 1.100 mW/cm 2 ± 10%
Operation 3 min on / 7 min off (intermittent)
Light probe 10 mm, black, disinfectable and auto-
clavable
Anti-glare cones autoclavable
Signal transmitter acoustic after 10 seconds and every time the
start button / time selection button is
pressed
Dimensions of the hand-
piece (without light
probe)
L = 180 mm W = 30 mm H = 30 mm
Weight of the handpiece 120 g (including battery and light probe)
Operating voltage hand-
piece
3.7 VDC with battery
5 VDC with power pack
Operating voltage Charging Base 5 VDC
Power pack Input: 100 – 240 VAC, 50 – 60 Hz 310 mA
Output: 5 VDC / 2 A
Manufacturer Friwo
Type: FW7401M/05
Weight of the power
pack
165 g
Operating conditions Temperature +10 °C to +35 °C (+50 °F to
+95 °F)
Relative humidity 30 % to 75%
Ambient pressure 700 hPa to 1060 hPa
Dimensions of the
charging base
D = 125 mm, H = 70 mm
Weight of the charging
base
195 g
Charging time Approximately 2 hours (with the battery
empty)
Power supply of the
handpiece
Li-Po battery (approx. 20 min. with a new,
fully charged battery)
Transportation and
storage conditions
Temperature –20 °C to +60 °C (+4 °F to
+140 °F)
Relative humidity 10% to 75%
Ambient pressure 500 hPa to 1060 hPa
The curing light has to be stored in closed,
roofed rooms and must not be exposed to
severe jarring.
Battery:
– Do not store at temperatures above 40 °C /
104 °F (or 60 °C / 140 °F for a short
period). Recommended storage tempera-
ture 15 – 30 °C (59 – 86 °F).
– Keep the battery charged and store no
longer than 6 months.
Delivery form 1 Charging base
1 Handpiece with power cord and power
pack
1 Light probe 10 mm, black
3 Anti-glare cones
1 Set of Operating Instructions