Toshiba Magnia SG20 - Instrukcja (Strona 8)

VPN Configuration and Usage for the Toshiba Magnia® SG20 Server 7
To communicate via VPN with a Microsoft Windows client over the Internet, the client
computer must be:
❖ Running Windows 95/98/Me/NT/2000/XP operating system (Macintosh operating
systems are not supported at this time)
❖ Connected to the Internet via a broadband or dial-up connection
❖ A computer that is not directly connected to the Magnia SG20 server.
Running the Client Configuration Diskette
1 Insert the client configuration diskette into the client computer.
2 Double-click the setup executable called SG20VPNSetup.exe (this is the program
downloaded when Generate VPN Disk was selected).
The Client Setup Wizard opens.
WARNING: If your server’s IP address or workgroup changes, the program used to
create a Client Setup Diskette must be downloaded again so it contains the correct
IP address. If you are using a client setup diskette that was configured on a Magnia
SG20 using a DHCP IP address, a warning message will display during setup. At
that point, you can select to reconfigure your server or continue with configuration.
TECHNICAL NOTE: Installing on a client system running Window 95 may require
you install the Dial Up Networking 1.3 Performance and Security Update. To verify
whether this upgrade is needed, see
Verifying that the upgrade is needed on page
10.
TECHNICAL NOTE: The VPN Client Setup Wizard is designed to properly
configure your client systems, and should be used under normal circumstances. If
this is not possible, instructions on how to manually setup a client system are
provided in Appendices A, B, and C. Please refer to the Appendix section which
corresponds to your operating system.