Toshiba Magnia SG20 - Instrukcja (Strona 15)

VPN Configuration and Usage for the Toshiba Magnia® SG20 Server 14
Appendix B - Manually Configuring a Client running
Windows NT
Virtual Private Networking Adapter
When connecting a client computer running Windows NT to the Magnia SG20, you must
first install the Virtual Private Networking Adapter. During this installation, you will be
required to use your Windows operating system setup disk.
To install your VPN Adapter:
1 Open the Windows Start Menu on the Windows Taskbar.
2 Select Settings>Control Panel to display the Windows Control Panel.
3 Double-click the Networking icon.
The Networking dialog box displays.
4 Click on the tab labeled Protocols.
5 Click the Add button.
The Select Network Protocol dialog box displays.
6 From the Network Protocol list, select the item named Point To Point Tunneling
Protocol, then click the OK button.
A dialog box asking the Number of Virtual Private Networks displays.
The text box should have the number 1 in it.
7 Click the OK button and a confirmation dialog box displays.
8 Click the OK button to display the Remote Access Setup dialog box.
9 Click the Add button to display the Add RAS Device dialog box.
10 Select the item labeled VPN-RASPPTPM in the drop-down list labeled RAS
Capable Devices, then click the OK button.
After configuration is complete, Windows NT will restart.