Toshiba Magnia SG20 - Instrukcja (Strona 18)

VPN Configuration and Usage for the Toshiba Magnia® SG20 Server 17
Appendix C - Manually Configuring a Client running
Windows 2000
Configuring Network Settings
Once you have a properly installed the VPN adapter, the only remaining network setting
that is required for your client computer to communicate with the Magnia SG20 using
VPN is the workgroup name.
To configure your network settings:
1 Open the Windows Start Menu on the Windows Taskbar.
2 Select Settings>Control Panel to display the Windows Control Panel.
3 Double-click the Network and Dial-Up Connections icon.
The Network and Dial-Up Connections dialog box displays.
4 Click the Advanced menu, then click Network Identification.
5 Click the button labeled Properties.
The Identification Changes dialog box displays.
6 In the text box labeled Workgroup, type in the word SAWORKGROUP in all upper
case letters to completely replace any text that was there before.
7 Click OK to close the Identification Changes dialog box.
8 Click OK to close the System Properties dialog box.
Windows will now require you to restart your computer.
WARNING: Once you complete the setup of your network settings, you will be
required to restart your computer. Be sure to exit all other applications before
proceeding.
WARNING: If you or your Network Administrator has changed the workgroup on the
Magnia SG20 from the default “SAWORKGROUP”, you will need to type the new
workgroup name.