Toshiba Magnia SG20 - Instrukcja (Strona 12)

VPN Configuration and Usage for the Toshiba Magnia® SG20 Server 11
Installing the VPN adapter
1 Open the Windows Start Menu on the Windows Taskbar.
2 Select Settings>Control Panel to display the Windows Control Panel.
3 Double-click the Add/Remove Programs icon.
The Add/Remove Programs dialog box displays.
4 Click the tab labeled Windows Setup.
5 Select Communications from the list labeled Components.
6 Click the Details… button to display the Communications dialog box.
7 Select the component named Virtual Private Networking by clicking on the check
box.
8 At this time you may be prompted for your Windows Setup Disk to provide some of
the drivers needed for Virtual Private Networking. If so, insert the Windows Setup
Disk and follow any instructions and prompts to install the drivers.
Configuring Network Settings
Once you have a properly installed the VPN adapter, the only remaining network setting
that is required for your client computer to communicate with the Magnia SG20 using
VPN is the workgroup name.
To configure your network settings:
1 Open the Windows Start Menu on the Windows Taskbar.
2 Select Settings>Control Panel to display the Windows Control Panel.
3 Double-click the Network icon.
The Network Properties dialog box displays.
4 Click the Identification tab.
5 Verify that the computer name displayed is unique for your network. If it is not a
unique name, change it to one that will not be used by any other computer.
WARNING: Once you complete the setup of your network settings, you will be
required to restart your computer. Be sure to exit all other applications before
proceeding.