Panasonic NVGS140EP - Instrukcja (Strona 6)

Before using
6
VQT0P88
(40) Tripod receptacle
This is a hole for attaching the camera to optional
tripod/VW-CT45E. (Please carefully read the
operating instructions for how to attach the tripod
to the camera.)
≥When the tripod is used, operate the camera
from the free style remote control with mic for
convenience. (When not using the remote
control, attach the clip to the grip belt for
convenience. When you move with remote
control attached to a pocket, etc., take care to
avoid falling of the tripod.)
≥You cannot open the card slot cover when the
tripod is used. Insert the card first and then
attach the tripod.
(41) Shoulder strap fixture
≥Put the strap through the fixture 1 and through
the stopper 2 so it will not come off. Extend
part 3 by at least 2 cm.
≥Fit the other end of the belt similarly.
(42) Lens hood
In order to remove the lens hood, rotate it
counterclockwise
1. In order to fit it, put into slot
2, and then rotate it clockwise.
≥Fit the MC protector or the ND filter of the Filter
Kit (VW-LF37WE; optional) in front of the lens
hood. Do not fit the other accessories on the
hood.
≥When fitting the tele conversion lens
(VW-LT3714M2E; optional) or the wide
conversion lens (VW-LW3707M3E; optional),
first remove the lens hood.
≥When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the
[W/T] lever is pressed toward the [W] side, the
4 corners of an image will be darkened.
(Vignetting)
≥The lens hood has a built-in lens cover.
(40)
(41)
2
3
1
1
2
(42)
GS150_EP.book 6 ページ ２００４年１２月２２日 水曜日 午後２時６分