Panasonic NVGS140EP Instrukcja Obsługi

Strona 42

Advertising
background image

Edit mode

42

VQT0P88

Printing pictures by directly
connecting to the printer (PictBridge)

To print pictures by directly connecting the movie
camera to the printer, use a printer compatible
with PictBridge. (Read the operating instructions
for the printer.)
Insert a card and set to Picture Playback

Mode.

1

Connect the movie camera and the printer
with the supplied USB
cable.

1 USB cable

≥The [PictBridge] indication appears on the

screen of the movie camera.
(When the printer is being recognized, the
[PictBridge] indication blinks.)

≥When no card is inserted in the movie camera,

the [PictBridge] indication does not appear.
(You cannot print any pictures.)

≥When the movie camera and the printer are not

connected properly, the [PictBridge] indication
keeps blinking. (It will blink for over approx.
1 minute.) Connect the cable or check the
printer.

≥We recommend using the AC adaptor as the

power supply.

≥When images are displayed in multi-screen,

they cannot be printed.

2

Select [SINGLE PRINT] or [DPOF PRINT].
≥If there is no file with a DPOF setting, you

cannot select [DPOF PRINT].

≥When you select [DPOF PRINT] for printing,

set the number of prints in DPOF setting.

≥When [DPOF PRINT] is selected, print after

you determine the paper size.

3

Move the joystick left and right to select a
desired picture, and then press it.

4

Select the desired number of prints.
≥You can set up to 9 prints.

5

Select the setting for date printing.
≥If the printer is not capable of date printing,

this setting is unavailable.

6

Select the paper size.

[STANDARD]: Size specific to the printer
[4

a5 INCH]

[5

a7 INCH]

[4

a6 INCH]

[A4]

≥You cannot set paper sizes not supported on

the printer.

7

Set [PRINT] >> [YES] to start printing.

ª

When you stop printing halfway

Move the joystick down.

≥Avoid the following operations during printing.

These operations disable proper printing.

≥Disconnecting the USB cable
≥Removing the card
≥Switching the mode dial
≥Turning off the power

≥Check the settings for the paper size, quality of

print, etc. on the printer.

≥You cannot print pictures that cannot be played

on the movie camera.

≥When the movie camera and the printer are

connected in the Tape Recording/Playback
Mode, the [

WEB] or the [

WEB] Indication

may appear on the LCD monitor. However,
pictures cannot be printed.

1

PictBridge

GS150_EP.book 42 ページ 2004年12月22日 水曜日 午後2時6分

Advertising
Podręcznik ten jest związany z następujących produktów: