Panasonic NVGS140EP - Instrukcja (Strona 26)

Record mode
26
VQT0P88
3 (In the case of 0 lux night view function)
Rotate the LCD monitor towards the lens
side.
≥When the LCD monitor is reversed, the
Power LCD Lamp turns on and the screen is
lit in white.
≥Record the subject while viewing it on the
viewfinder.
≥The light of the LCD monitor reaches approx.
1.2 m or less.
ª To cancel the colour night view
function
Select the night view icon until the night view
indication disappear.
≥If set in a bright place, the screen may become
whitish for a while.
≥The night view function makes the signal
charging time of CCD up to approximately 25 k
longer than usual, so that dark scenes invisible
to the naked eye can be recorded brightly. For
this reason, bright dots that are usually invisible
may be seen, but this is not a malfunction.
≥The night view function is canceled when you
operate the power switch or the mode dial.
Soft skin mode
This allows the skin colour to be recorded in a
softer tone. This is more effective if you record the
bust image of a person.
≥Set to Tape/Card Recording Mode.
1 Press the joystick until the icon 1 appears.
2 Move the joystick down to select the soft
skin icon [
].
ª To cancel the soft skin mode
Select the [ ] icon again.
≥If the background or anything else in the scene
has colours similar to the skin colour, they will
also be smoothed.
≥If the brightness is insufficient, the effect may
not be clear.
Tele-macro function
By focusing only on the subject and blurring the
background, the image can be impressive. This
camera can focus on the subject at a distance of
approx. 40 cm.
≥Set to Tape/Card Recording Mode.
1 Press the joystick until the icon 1 appears.
2 Move the joystick up to select the
tele-macro icon [
].
≥If the magnification is 10k or less, then it is
automatically set to 10 k.
ª To cancel the tele-macro function
Select the [ ] icon again.
≥If a sharper focus cannot be achieved, adjust
the focus manually.
≥In the following cases, the tele-macro function is
cancelled.
≥The zoom magnification becomes lower than
10 k.
≥The [OFF/ON] switch or the mode dial is
operated.
1
1
GS150_EP.book 26 ページ ２００４年１２月２２日 水曜日 午後２時６分