Panasonic NVGS140EP - Instrukcja (Strona 34)

Playback mode
34
VQT0P88
Playback mode
Playing back tape
≥Set to Tape Playback Mode.
1 Operate with joystick.
1/;: Playback/Pause
6:
Rewind/Review playback (Reverts to
playback with the
1/; icon.)
5: Fast forward/Cue playback (Reverts to
playback with the
1/; icon.)
∫: Stop
≥During cue/review playback, fast-moving
images may show noise as a mosaic.
≥Before and after cue/review playback, the
screen may become blue for a moment or
images may be disturbed.
ª To adjust volume
Adjust the speaker or headphone volume for
playback.
1 Move the [ s /VOL r] lever to adjust the
volume.
Towards [ r]: increases the volume
Towards [ `]: decreases the volume
(Nearer the bar to [ r], larger the volume.)
≥On the remote control, press the [T] button to
increase the volume or the [W] button to
decrease it.
≥When the adjustment is completed, the volume
indication will disappear.
≥If you do not hear the sound, check the settings
of [SETUP] >> [12bit AUDIO].
ª Repeat playback
When the tape end is reached, the tape will be
rewound and played back again.
1 Set [ADVANCE] >> [REPEAT PLAY] >> [ON].
≥The [ ] indication appears. (In order to
cancel the repeat playback mode, set
[REPEAT PLAY] >> [OFF] or set [OFF/ON]
switch to [OFF].)
≥When you set [USB FUNCTION] >> [WEBCAM]
and then connect the USB connection cable, the
repeat playback mode is canceled.
ª Settings on the audio
≥If you cannot listen to the desired audio when
playing back a tape, check the settings in
[SETUP] >> [12bit AUDIO].
≥When you record or dub the audio in [12bit] and
set [SETUP] >> [12bit AUDIO] >> [MIX], the
audio will be played back in stereo sound
regardless of the settings in [AUDIO OUT].
PC
VOL
GS150_EP.book 34 ページ ２００４年１２月２２日 水曜日 午後２時６分