Panel control – MPM 12-KPO-04 Instrukcja Obsługi

Strona 19

Advertising
background image

1

SVK

PANEL CONTROL

CAUTIONS: If the unit is turned off in cool/ dry / heat mode and restarted immediately ,
the unit will wait at least 3minutes before running again.

Fig 3

1. Buttons

TIMER: Press this button to enter time-setting status.

MODE: Press this button to select cool, heat, dry or fan mode (heat mode only in

YPC-H model).

: Press up or down button to set temperature or adjust the time in

Timer mode. When setting timer-on and timer-off, press these two buttons to

adjust the time of starting or shutting off. Press both buttons to vary from

Celsius to Fahrenheit.

POWER: Press this button to turn on/off the unit.

SPEED: Press this button for 5 seconds to select high, middle or low fan Speed. When

the machine is on FAN mode, press this button for five seconds, the system

will dry itself; if you want to stop drying, press for another five seconds.

SWING: Press this button to make the vertical louver swing automatically.

Press once more, the swing will stop.

2. LED display

HEAT: On heating mode, the led will illuminate.

COOL: On cooling mode, the led will illuminate.

FAN: On fan mode, the led will illuminate.

DRY: ON dehumidifying mode, the led will illuminate.

COMP: When compressor is working, the led will illuminate.

FULL: When water is full in the machine, the led will illuminate.

ADD WATER: When the led is illuminating, the user can put some water in the

machine.

HIGH: When the fan speed is high, the led will illuminate.

MED: When the fan speed is middle, the led will illuminate.

LOW: When the fan speed is low, the led will illuminate.

Indicate the time and temperature. Display EX (X=2,3,5) when there

is something wrong (refer to Self diagnosis function).Display E4

when coil is defrosted.

Celsius degree and Fahrenheit degree indicator.

INSTR.indd...19

2011-01-10...11:11:17

Advertising