MPM 12-KPO-04 - Instrukcja (Strona 18)

1
SVK
PANEL CONTROL
CAUTIONS: If the unit is turned off in cool/ dry / heat mode and restarted immediately ,
the unit will wait at least 3minutes before running again.
Fig 3
1. Buttons
TIMER: Press this button to enter time-setting status.
MODE: Press this button to select cool, heat, dry or fan mode (heat mode only in
YPC-H model).
: Press up or down button to set temperature or adjust the time in
Timer mode. When setting timer-on and timer-off, press these two buttons to
adjust the time of starting or shutting off. Press both buttons to vary from
Celsius to Fahrenheit.
POWER: Press this button to turn on/off the unit.
SPEED: Press this button for 5 seconds to select high, middle or low fan Speed. When
the machine is on FAN mode, press this button for five seconds, the system
will dry itself; if you want to stop drying, press for another five seconds.
SWING: Press this button to make the vertical louver swing automatically.
Press once more, the swing will stop.
2. LED display
HEAT: On heating mode, the led will illuminate.
COOL: On cooling mode, the led will illuminate.
FAN: On fan mode, the led will illuminate.
DRY: ON dehumidifying mode, the led will illuminate.
COMP: When compressor is working, the led will illuminate.
FULL: When water is full in the machine, the led will illuminate.
ADD WATER: When the led is illuminating, the user can put some water in the
machine.
HIGH: When the fan speed is high, the led will illuminate.
MED: When the fan speed is middle, the led will illuminate.
LOW: When the fan speed is low, the led will illuminate.
Indicate the time and temperature. Display EX (X=2,3,5) when there
is something wrong (refer to Self diagnosis function).Display E4
when coil is defrosted.
Celsius degree and Fahrenheit degree indicator.
INSTR.indd...18 2011-01-10...11:11:17