Orion 26LBT981 Instrukcja Obsługi

Strona 9

Advertising

English - 8 -

Step 6 - First Time Installation

IMPORTANT: Ensure that the aerial is connected before switching
on the TV for the fi rst time installation.
When the TV is operated for the fi rst time, installation wizard will
guide you through the process. First, language selection screen
will be displayed. Use “ ” or “ ” buttons to select your language
and press OK button. After selecting the language, “Welcome!”
screen will be displayed, requiring you to set Country, Teletext
Language, Scan Encrypted and Active Antenna (optional) options.
Use navigation buttons to set preferences. Note that Antenna
power (optional) should be Off when standard antenna is used
instead of the active antenna. When fi nished, press OK button
on the remote control to continue and the following message will
be displayed on the screen:

Select YES and continue. Afterwards, search type OSD will be
displayed on the screen. If you select CABLE option, the following
screen will be displayed:

You can select frequency ranges from this screen. For highlighting
lines you see, use “ ” or “ ” button. You can enter the frequency
range manually by using the numeric buttons on the remote
control. Set Start and Stop Frequency as desired by using numeric
buttons on the remote control. After this operation, you can set
Search Step as 8000 KHz or 1000 KHz. If you select 1000 KHz,
the Tv will perform search process in a detailed way. Searching
duration will thus increase accordingly. When fi nished, press OK
button to start automatic search. If you select AERIAL option
from the Search Type screen, the television will search for digital
terrestrial TV broadcasts. You can press “MENU” button to cancel.
After all the available stations are stored, Channel List will be
displayed on the screen. If you like the sort channels, according
to the LCN, please select Yes and than press OK. Press OK button
to quit channel list and watch TV.

Menu Operation

Press “MENU” button on your remote control to display main
menu screen. Use Left or Right button to select a menu tab and
press OK to enter. Use Left / Right / Up / Down to select or set
an item. Press “RETURN/BACK” or “MENU” button to quit a
menu screen.

Input Selection

Once you have connected external systems to your TV, you can
switch to different input sources. Press “SOURCE” button on your
remote control consecutively for directly changing sources.

Changing Channels and Volume

You can change the channel and adjust the volume by using the
V+/- and P+/- buttons on the remote. You can also change the
channels by pressing the buttons on the front panel of your TV.

Media Playback via USB Input

You can connect a USB hard disk drive or USB memory stick to
your TV by using the USB inputs of the TV. This feature allows
you to play fi les stored in a USB drive. 2.5” and 3.5” inch (hdd with
external power supply) external hard disk drives are supported.
IMPORTANT! You should back up your fi les before making any
connections to the TV set in order to avoid any possible data loss.
Note that manufacturer will not be responsible for any fi le damage
or data loss. It is possible that certain types of USB devices (e.g.
MP3 Players) or USB hard disk drives/memory sticks may not be
compatible with this TV. The TV supports NTFS and FAT32 disk
formatting. Note: While formatting a USB hard disk that has 1TB
(Tera Byte) or more fi le capacity, you can experience problems
with the formatting process. Quickly plugging and unplugging
USB devices, is a very hazardous operation. Especially, do not
repeatedly quickly plug and unplug the drive. This may cause
physical damage to the USB player and especially the USB device
itself. Do not pull out USB module while playing a fi le.

Media Browser Menu

You can play photo, music, and movie fi les stored on a USB disk
by connecting it to your TV and using the Media Browser screen.
To do this, perform the following: Connect a USB disk to the USB
input located on the side of the TV. Press “MENU” button and
select Media Browser tab by using Left/Right and OK buttons.
Main media browser screen will be displayed. You can display
the related content by selecting the Video, Music or Picture tab.
Follow the button indications under each on screen menu for
media playback features.

Changing Image Size: Picture Formats

Programmes can be watched in different picture formats,
depending on the transmission received. You can change the
aspect ratio (image size) of the TV for viewing the picture in
different zoom modes. Press “SCREEN” button repeatedly to
change the image size.

Using the Channel List

The TV sorts all stored stations in the Channel List. You can edit
this channel list, set favourites or set active stations to be listed
by using the Channel List options. Press “MENU” button to view
main menu. Select Channel List item by using Left or Right button.
Press OK to view menu contents. Select Edit Channel List to
manage all stored channels. Use Up or Down and OK buttons
to select Edit Channel List. Press Up or Down button to select
the channel that will be processed. Press Left or Right button to
select a function on Channel List menu. Use P+/P- buttons to
move page up or down. Press “MENU” button to exit.

01_MB62_[GB]_woypbpr_IDTV_TC_NICKEL17_3902UK_26981W_10078517_50216677.indd 8

27.04.2012 18:04:52

Advertising