Panasonic VDRD220EP - Instrukcja (Strona 55)

55
LSQT1156
Recording
2
Move the switch down and set it
to FOCUS position.
The manual focus indication [MF] and the icon
shown in the illustration appear.
3
Move the joystick left or right to
bring the subject into focus.
≥ The subject may not be in focus when zoomed
in if focusing with a wide angle. First, zoom in
on the subject, and then focus on it.
To restore to the automatic adjustment
Press the AUTO/MANUAL/FOCUS switch down
again to the FOCUS position.
≥ You can also restore the auto focusing by
setting the AUTO/MANUAL/FOCUS switch to
AUTO.
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
The automatic white balance function may not
reproduce natural colours depending on the
scenes or lighting conditions. If so, you can
adjust the white balance manually.
¬Rotate the mode dial to select or
.
1
Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
The icon shown in the illustration is displayed
automatically.
2
Move the joystick up to select
[
].
3
Move the joystick left or right to
select the white balance mode.
To restore to the automatic adjustment
Set the white balance mode to [ ].
≥ You can also restore the automatic adjustment
by setting the AUTO/MANUAL/FOCUS switch
to AUTO.
White balance
This is for recording in natural
colours.
MNL
4/4 4/4 NEXT NEXT 4/4 NEXT
MNL
4/4 4/4 NEXT NEXT 4/4 NEXT
[ ] Auto white balance adjustment
[ ] Indoor mode (for recording under
incandescent lamps)
≥ Incandescent lights, halogen lamps
[ ] Outdoor mode
≥ Outdoors under a clear sky
[ ] Manual adjustment mode
≥ Mercury-vapor lamps, sodium lamps,
some fluorescent lights
≥ Lights used for wedding receptions at
hotels, stage spotlights in theatres
≥ Sunrise, sunset, etc.
MNL
3/3 3/3 NEXT NEXT 3/3 NEXT
MNL
3/3 3/3 NEXT NEXT 3/3 NEXT
MNL
BACK BACK BACK
AWB
AWB
LSQT1156_EN.book 55 ページ ２００６年１２月７日 木曜日 午後７時５３分