Panasonic NVGS320 - Instrukcja (Strona 28)

Record mode
28
VQT1A45
ª To record still pictures clearly
≥When zooming in on the subject with a
magnification of 4k or higher, it is difficult to
reduce the slight shaking from holding the
movie camera by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
≥When recording still pictures, hold the movie
camera firmly with your hands and keep your
arms stationary at your side so as not to shake
the movie camera.
≥You can record stable pictures without shaking
by using a tripod and the remote control.
≥For the number of still pictures to be recorded
on a card, refer to -80- .
≥The moving picture and sound cannot be
recorded.
≥While data are recorded on a card, do not
operate the mode dial.
≥When the access lamp is lit, do not insert or
remove a card.
≥Another product may degrade or not play back
data recorded on this camera.
≥If set [PICT.QUALITY] >> [ ], mosaic-pattern
noise may appear on a playback image
depending on the picture content.
≥When the [PICTURE SIZE] is set to other than
[ ] or [ ], the mega pixel recording mode
is set.
≥It is not possible to press the [PHOTO SHOT]
button on the remote control halfway.
ª On-screen display in the card
recording mode
1) Still picture size
2) Card indication (
-66- )
3) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
4) Quality of still pictures
ª Select the size of still pictures to be
recorded on a card
1 Set [BASIC] >> [PICTURE SIZE] >> select
the desired picture size.
REC ASPECT [16:9]:
: 2048 t1152
: 640 t360
REC ASPECT [4:3]:
: 2048 t1512
: 1600 t1200
: 1280 t960
: 640 t480
≥When you purchase this unit, [REC ASPECT] is
set to [16:9]. The sides of pictures recorded
when [16:9] is set may be cut at printing. Check
before printing.
ª Select the picture quality for
photoshot images
1 Set [BASIC] >> [PICT.QUALITY] >> select
the desired picture quality.
[ ]: High picture quality
[ ]: Normal picture quality
≥You can also change the picture quality on
[ADVANCED] >> [PICT.QUALITY] in the tape
recording mode.
ª Recording with a shutter operation
effect
You can add a shutter operation simulating
sound.
1 Set [ADVANCED] >> [SHTR EFFECT] >>
[ON].
ª About the shutter chance mark
≥The shutter chance mark does not appear in
manual focus mode.
≥When the subject is not easily focused, focus on
the subject manually.
≥You can record still pictures on the card even if
the shutter chance mark does not appear, but
pictures may be recorded without being
focused.
≥The shutter chance mark does not appear or
becomes difficult to be displayed in the following
cases.
≥When the zoom magnification is high.
≥When the movie camera is shaken.
≥When the subject is moving.
≥When the subject stands against the light
source.
≥When close subjects and far subjects are
included in the same scene.
≥When the scene is dark.
≥When there is a bright part in the scene.
≥When the scene is filled with only horizontal
lines.
0.2 0.3
M
100 100
1)
3)
4)
2.4
2)
2.4
0.2
3.1
M
2
M
1
M
0.3
M
VQT1A45_EP_ENG.book 28 ページ ２００６年１２月６日 水曜日 午前９時１０分