Panasonic NVGS320 - Instrukcja (Strona 27)

Record mode
27
VQT1A45
Recording still pictures on a card
while recording image onto a tape
You can record still pictures while recording
image onto a tape.
≥Set to Tape Recording Mode.
1 Press the [ ] button fully while recording
image onto a tape.
≥For the number of still pictures to be recorded
on a card, refer to -80- .
≥When recording pictures onto a card, the
recording start/stop button is disabled.
≥You can select a picture quality for still pictures
to be recorded. ( -28- )
≥In order to record still pictures with higher
quality, we recommend using the Card
recording mode.
≥When recording still pictures, hold the movie
camera firmly with your hands and keep your
arms stationary at your side so as not to shake
the movie camera.
ª Select the size of still pictures to be
recorded on a card in Tape Recording
Mode
1 Set [ADVANCED] >> [PICTURE SIZE] >>
select the desired picture size.
REC ASPECT [16:9]:
: 1280 t720
: 640 t360
REC ASPECT [4:3]:
: 1280 t960
: 640 t480
Recording still pictures onto a card
(Photoshot)
≥Set to Card Recording Mode.
1 Press the [ ] button halfway in order to
adjust focusing. (For auto focusing only)
≥If you set [O.I.S.] to [ON], then the image
stabilizer function will be more effective.
([
(MEGA OIS)] will be indicated.)
≥The iris/gain value is fixed and this camera
focuses on the subject automatically.
1 Shutter chance mark
± (The white lamp flashes.):
Focusing
¥ (The green lamp lights up.):
When in focus
No mark: When focusing is unsuccessful
≥The shutter chance mark is indicated as
follows when the [ ] button is not pressed
halfway. Please use it as a guide for
recording.
¥ (The green lamp lights up.):
When in focus and a good
picture can be recorded
± (The white lamp lights up.):
Almost in focus
2 Focus area
2 Press the [ ] button fully.
1
0.2
1
M
0.3
M
MEGA
1
2
VQT1A45_EP_ENG.book 27 ページ ２００６年１２月６日 水曜日 午前９時１０分