Orion TV40FBT912 - Instrukcja (Strona 27)

English - 26 -
Viewing the Connections
AV Connection
Cable (supplied)
Scart
Connection
(back)
VGA
Connection
(back)
PC/YPbPr Audio
Connection
(back)
HDMI
Connection
(back & side)
S/PDIF Optical Out
(back)
S/PDIF
Side AV
Connection
(side)
Headphone
Connection
(side)
USB
Connection
(side)
Connector Type Cables Device
Y
B
P
R
P
A
U
D
IO
L
&
R
S
ID
E
A
V
H
E
A
D
P
H
O
N
E
YPbPr Video
Connection
(back)
CI
Connection
(side)
CAM
module
Subwoofer
Connection
(back)
NOTE: When connecting a device via the Side AV input, you must use the connection cables to enable connection.
See the illustrations above. To enable PC audio, you will need to use PC/YPBPR AUDIO CONNECTION cable’s WHITE &
RED inputs. | If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.| When
receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart socket.
| When using the wall mounting kit (optional), we recommend that you plug all your cables into the back of the TV before
mounting on the wall. | Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the module
instruction manual for details of the settings. Insert the CAM and then the viewing card to the slot that is located in the terminal
cover at the rear side of the TV. The module should be correctly inserted, it is impossible to insert fully if reversed. The CAM
or the TV terminal may be damaged if the CAM is forcefully inserted.