Orion TV32LBT981 - Instrukcja (Strona 8)

- 7 -
S/PDIF Coaxial Out 6. outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to transfer audio signals to a device that has S/PDIF input
RF Input
7. connects to an aerial antenna system.
Note: that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
PC Input
8. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC
HDMI Inputs
9. are for connecting a device that has an HDMI socket. Your LCD TV is capable of
displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you 1.
subscribe to. For more information, see “Conditional Access” section.
Side USBs
2.
Side HDMI Input is for connecting a device that has an HDMI socket. 3.
Headphone jack is used for connecting an external headphone to the system. Connect to 4.
the HEADPHONE jack to listen to the TV from headphones (optional).
Side audio-video connection
5. input is used for connecting video and audio signals of
external devices. To make a video connection, you must use the supplied AV connection
cable for enabling connection. First, plug singular jack of the cable to the TV’s Side AV
socket. Afterwards, insert your video cable’s (not supplied) connector into the YELLOW input
(located on the plural side) of the supplied AV connection cable. Colours of the connected
jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side AV connection
cable. Afterwards, insert your device’s audio cable’s connectors into the RED and WHITE
jack of the supplied side AV connection cable. Colours of the connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE) to enable sound
connection when connecting a device to your TV by using PC or COMPONENT VIDEO input.
Aerial Connection
Connect the aerial to the AERIAL INPUT socket located at the rear of the TV. •
Aerial & Cable Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the •
mains. Plug the power cable to the mains socket outlet.
01_MB65_[GB]_DVB_TC_GOLD14_5100UK_32981WLED_10076855_50208202.indd Ksm1:7 01_MB65_[GB]_DVB_TC_GOLD14_5100UK_32981WLED_10076855_50208202.indd Ksm1:7 20.12.2011 17:06:44 20.12.2011 17:06:44