Panasonic KXTGA717FX - Instrukcja (Strona 15)

15
Basic Operations
Multi-unit operation
*1 KX-TG7150/KX-TG7170 does not support conference call feature.
*2 After pressing {x}, the rest of this procedure must be completed within 1 minute.
*3 If you forget the base unit PIN, consult your nearest Panasonic service centre.
Feature Operation
Intercom: calling Example: When you call handset 1
{
INT} i Press {1} (desired handset number).
L When finished talking, press {ih}.
Intercom: answering Press {C}/{s}.
L When finished talking, press {ih}.
Transferring calls between
handsets Example: When you transfer a call to handset 1
During an outside call, press {INT}. i Press {1} (desired
handset number). i When the handset 1 answered, press
{ih}
to complete transfer.
Conference calls *1
(2 people can have a
conference call with an
outside party)
Example: When you make a conference call with handset 1
During an outside call, press {INT}. i Press {1} (desired
handset number). i When the handset 1 answered, press
{
3} to establish a conference call.
Manual registration Handset:
{j
/OK} i “Handset Setup” i {>} i
“Registration” i {>} i “Register H.set” i
{>}
Base unit:
Press and hold {x} on the base unit for about 3 seconds,
until the registration tone sounds.
*2
Handset:
Wait until “Enter Base PIN” is displayed, then enter the
base unit PIN (default: “0000”).
*3 i {j/OK}
L When the handset has been registered successfully, w
will stop flashing.
Cancelling a handset {j /OK} i “Base Unit Setup” i {>} i Enter
“335”. i “Cancel Handset” i {>} i Select the
handset(s) you want to cancel, by pressing the desired
handset number. i {j/OK} i “Yes” i {>} i
{ih}
TGA715FX_717FX(e-e).book Page 15 Wednesday, February 28, 2007 2:47 PM