Panasonic KXTGA717FX - Instrukcja (Strona 11)

11
Preparation
see page 12.
Registering the handset to
your base unit
Register to:
KX-TG7100/KX-TG7120/KX-TG7150/KX-
TG7170/KX-TG8100/KX-TG8120/KX-
TG9120
Ensure that the handset is switched on. If it
is not on, press and hold {ih} for few
seconds to turn the handset on.
1 Lift the handset and press {ih} to put
the handset in standby mode.
2 Press and hold {x} on the base unit for
about 3 seconds, until the registration
tone sounds.
3 Place the handset on the base unit. The
registration tone continues to sound. With
the handset still on the base unit, wait
until a confirmation tone sounds and w
stops flashing.
Note:
L If an error tone sounds, or if w is still
flashing, register the handset manually
(page 15).
L If all registered handsets start ringing in
step 2, press {x} to stop. Start again from
step 1.
L Charge the batteries for about 7 hours
before initial use.
L The answering system is available only
when KX-TGA715/KX-TGA717 is
registered to KX-TG7120/KX-TG8120/
KX-TG9120.
L KX-TGA715/KX-TGA717 does not
support the SMS features.
L For KX-TG9120 with KX-TGA914
(Cordless camera) users
KX-TGA715/KX-TGA717 does not
support camera monitoring features.
L For KX-TG9120 with KX-TGA915 (USB
adaptor) users
KX-TGA715/KX-TGA717 does not
support internet call features.
TGA715FX_717FX(e-e).book Page 11 Wednesday, February 28, 2007 2:47 PM