Panasonic KXTGA717FX - Instrukcja (Strona 10)

10
Preparation
Battery strength
Panasonic Ni-MH battery performance
(included batteries)
Note:
L It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
L Actual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
L
Battery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
L Even after the handset is fully charged,
the handset can be left on the charger
without any ill effect on the batteries.
L The battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the
charger and charge for at least 7 hours.
Symbols used in these
operating instructions
Display language
17 display languages are available.
1
{ih} i {j/OK}
2 Press {^} or {V} to select “Handset
Setup
”. i {>}
3 Press {^} or {V} to select “Display
Setup
”. i {>}
4 Press {^} or {V} to select “Select
Language
”. i {>}
5 Press {^} or {V} to select the desired
language. i {>} i {ih}
Note:
L If you select a language you cannot read,
press {ih}, press {j/OK}, press {^} 3
times, press {>}, press {V} 2 times, press
{>}
, press {V}, press {>}, select the
desired language, press {>}, then press
{ih}
.
L To change the voice announce language,
Battery icon Battery strength
5 High
6 Medium
7 Low
When flashing: Needs
to be charged.
Operation Operating time
In continuous use KX-TGA715:
12 hours max.
KX-TGA717:
10 hours max.
In continuous
standby mode 150 hours max.
Symbol Meaning
{j
/OK} Press {j/OK}.
i Proceed to the next
operation.
“ ” Select the words in
quotations shown on the
display (e.g., “Handset
Setup
”) by pressing {^}
or {V}.
TGA715FX_717FX(e-e).book Page 10 Wednesday, February 28, 2007 2:47 PM