Panasonic SDRH20EP - Instrukcja (Strona 93)

Others
93
LSQT1210
Messages
NO DATA. There are no images recorded on the media.
CAN NOT RECORD. HDD
IS FULL.
The HDD is full or the number of scenes has reached the maximum
limit so no further data can be recorded. Back up the data on the
HDD to a computer, etc. and then delete unnecessary scenes or
format the HDD. (l 60, 65, 69)
CAN NOT RECORD. THE
NUMBER OF SCENES HAS
EXCEEDED THE MAXIMUM
LIMIT. BACKUP HDD THEN
FORMAT.
RECOMMEND DATA BACK
UP PERIODICALLY.
The capacity of the HDD is limited. We recommend backing up
important recorded data periodically to a computer etc. to protect it.
This message does not indicate that there is a problem with this
unit.
HDD BACKUP
RECOMMENDED. There is a possible problem with the HDD. Immediately copy the
data on the HDD to a computer etc. and then have the unit repaired.
THIS CARD CANNOT
RECORD IN VIDEO MODE. An 8 MB or 16 MB SD card has been inserted in video recording
mode.
CHECK CARD. This card is not compatible or it cannot be recognised by the unit.
CARD LOCKED. The write protection switch on the SD card is set to LOCK. (l 16)
CARD FULL. The SD card is full or the number of scenes has reached the
maximum limit so no further data can be recorded. Delete
unnecessary scenes (l 60, 65) or insert a new SD card.
SCENE NUMBER IS FULL.
CARD DOOR OPENED. The card slot cover is open. Close it.
ERROR OCCURRED.
RECORDING IS STOPPED.
≥ When using an SD card that can be used for motion picture
recording (l 16)
When this message appears, it is recommended that you format the
SD card being used. (l 69) When an SD card is formatted, all the
data recorded on it will be deleted. Back up the data on the SD card
to a computer, etc. before formatting the SD card.
≥ When using any other card
Use a Panasonic SD card or another SD card which can be used to
record motion pictures. (l 16)
CANNOT RECORD IN AGS
MODE.
The AGS function is activated. (l 34)
LSQT1210_EP(EN).book 93 ページ ２００７年２月９日 金曜日 午後６時０分