Panasonic SDRH20EP - Instrukcja (Strona 39)

Recording
39
LSQT1210
6
Press the Photoshot button [ ]
fully to take the picture.
∫ SDR-H20
5
Press the Photoshot button [ ].
The unit automatically focuses on the subject at the
centre of screen (when auto focus is selected).
≥ For information about the number of recordable still pictures ( l 111)
≥ The sound cannot be recorded.
≥ If the write protection switch on the SD card is set to LOCK, it cannot be used for recording. (
l 16)
≥ The Photoshot button [ ] on the remote control cannot be pressed halfway. (SDR-H250)
≥ If the [PICT. QUALITY] is set to [ ], mosaic-pattern noise may appear on a playback image
depending on the picture content.
≥ Other products may degrade or not play back still pictures recorded with this unit.
∫ To record still pictures clearly
≥ When zooming in on the subject with a magnification of 4k or higher, it is difficult to reduce the slight
shaking from holding this unit by hand. We recommend decreasing the zoom magnification and
approaching the subject when recording.
≥ When recording still pictures, hold the unit firmly with your hands and keep your arms stationary at
your side so as not to shake the unit.
≥ You can record stable pictures without shaking by using a tripod and the remote control.
A Focus indication
± (The white lamp flashes.): Focusing
¥ (The green lamp lights up.): When in focus
No mark:
When focusing is unsuccessful.
≥ The focus indication is indicated as follows when the Photoshot
button [ ] is not pressed halfway. Please use it as a guide for
recording.
¥ (The green lamp lights up.): When in focus and a good picture can be recorded.
± (The white lamp lights up.): Almost in focus
B Focus area
A
B
LSQT1210_EP(EN).book 39 ページ ２００７年２月９日 金曜日 午後６時０分