Samsung LE46C750R2W - Instrukcja (Strona 47)

47
English
04
Advanced Featur
es
Troubleshooting for Anynet+ ¦
Problem Possible Solution
Anynet+ does not work. Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. •
Only one receiver (home theatre) can be connected. •
Check if the Anynet+ device power cord is properly connected. •
Check the Anynet+ device’s Video/Audio/HDMI cable connections. •
Check whether • Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode. •
Check whether the remote control is Anynet+ compatible. •
Anynet+ doesn’t work in certain situations. (Searching channels, operating • Media Play or Plug & Play (initial
setup), etc.)
When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
•
and on again.
Check if the Anynet+ Function of Anynet+ device is set on.
•
I want to start Anynet+. Check if the Anynet+ device is properly connected to the TV and check if the • Anynet+ (HDMI-CEC) is set to
On in the Anynet+ Setup menu.
Press the
• TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+. Select • View TV in the Anynet+ menu.
Press the • SOURCE button on the TV remote control and select a non- Anynet+ device.
Press • P >/< , and PRE-CH to change the TV mode. (Note that the channel button operates only when a
tuner-embedded Anynet+ device is not connected.)
The message “Connecting to
Anynet+ device...” appears on the
screen. You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. •
Use the remote control when the Anynet+ setting or switching to view mode is complete. •
The Anynet+ device does not play. You cannot use the play function when • Plug & Play (initial setup) is in progress.
The connected device is not
displayed. Check whether or not the device supports Anynet+ functions. •
Check whether or not the HDMI cable is properly connected. •
Check whether • Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again. •
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ •
functions.
If connection is terminated because there has been a power interruption or the HDMI cable has been
•
disconnected, please repeat the device scan.
The TV Programme cannot be
recorded. Check whether the antenna jack on the recording device is properly connected. •
The TV sound is not output
through the receiver. Connect the optical cable between TV and the receiver. •
The ARC function enables digital output of sound using the • HDMI IN 2(ARC) port and can only be operated
when the TV is connected to an audio receiver that supports the ARC function.
[LC750-XH]BN68-02808J.indb 47 2010-09-28 �� 10:05:35