Samsung LE46C750R2W - Instrukcja (Strona 19)

19
English
03
Basic Featur
es
“
✎
Side by Side” and “Top & Bottom” are available
when the resolution is 720p, 1080i and 1080p in
(DTV, HDMI and USB modes) or set to PC (HDMI
mode).
“Vertical Strip”, “Line by Line” and “Checker
✎
Board” are available when the resolution is set to
PC (HDMI mode).
“Frame Sequential” displays the frequency (60Hz
✎
only) when the resolution is set to PC.
3D ■ → 2D (Off / On): Displays the image for the left eye only.
This function is deactivated when
✎
3D Mode is set
to “2D → 3D” or Off.
3D View point: ■ The overall adjustment of 3D perspective.
This function is deactivated when
✎
3D Mode is set
to “2D → 3D” or Off.
Depth ■ : Adjusts focus / depth in “2D → 3D” mode.
This function is only activated when the
✎
3D Mode
is “2D → 3D”.
Picture Correction ■ : Adjusts the images for the left and
right eye.
3D Auto View (Off / On)
■ : If 3D Auto View is set to On,
a “Side-By-Side” format HDMI signal with one of the
resolutions below is automatically switched to 3D.Here,
correct 3D information must be sent from the Standard
HDMI 3D Format.
If a 3D failure occurs due to a 3D information error,
✎
set 3D Auto View to Off and manually select a 3D
Mode using the
3D( ) button or corresponding
menu.
Support resolution (16:9 only)
✎
Resolution Frequency (Hz)
1280 x 720p 50 / 60 Hz
1920 x 1080i 50 / 60 Hz
1920 x 1080p 24 / 30 / 50 / 60 Hz
3D Optimize ■ : The overall adjustment of 3D effect.
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x
1080 input.
An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.
How to watch the 3D image
1. Press the CONTENT button, then the Content View
menu will appear.
2. Press the ◄ or ► button, then select 3D.
To watch in 3D, wear glasses and press the power
button on the glasses. Viewing 3D TV motion pictures
for long periods may cause eye fatigue and/or dizziness.
3. Select OK, then press the ENTER E button.
4. Using the ◄ or ► buttons on your remote control,
selects the 3D Mode of the image you want to view.
Some 3D modes may not be available depending
✎
on the format of the image source.
Supported formats and operating specifications for
Standard HDMI 3D
The 3D formats indicated below are recommended by
✎
the HDMI association and must be supported.
Source signal format Standard HDMI 1.4 3D
1920x1080p@24Hz x 2 1920x2205p@24Hz
1280x720p@60Hz x 2 1280x1470p@60Hz
1280x720p@50Hz x 2 1280x1470p@50Hz
The mode is automatically switched to 3D mode for the 3D
video input in one of the formats above.
For the Standard HDMI 3D format with 24Hz, the TV is
optimized as follows:
Resolution First Display Mode – : If Motion Plus is set
to Off, Clear or Standard, you can watch the video
at a high resolution optimized to the resolution of the
source video.
– Judder Reduction Display Mode: When Motion
Plus is set to Smooth or Custom, you can watch a
smooth picture without judder.
3D
OK
To watch in 3D, wear 3D glasses and
press the power button on the glasses.
Viewing 3D TV motion picture for long
periods may cause eye fatigue and/or
dizziness
Cancel
U Move E Enter R Exit
3D
Using the lEFT / rIGHT keys on the remote control,
select the icon suitable for the picture on screen.
U Move E Enter R Exit
Using the lEFT / rIGHT keys on the remote control,
select the icon suitable for the picture on screen.
[LC750-XH]BN68-02808J.indb 19 2010-09-28 �� 10:05:15