Panasonic SDRH280 - Instrukcja (Strona 79)

79
LSQT1361
With a PC
Connection and
recognition
After the software is installed, the unit must be
connected to the PC and be correctly recognised
by the PC.
≥ Remove the supplied CD-ROM from your PC.
¬Connect this unit to the AC adaptor
and turn on the unit.
1
Connect this unit and a PC.
A USB cable (supplied)
≥ Insert the USB connectors as far as they will
go.
≥ Do not use any other USB connection cables
except the supplied one. (Operation is not
guaranteed with any other USB cables.)
The USB function selection screen will appear.
2
Select [PC CONNECT] # [HDD]
or [SD CARD] then press the
joystick.
This unit is automatically detected by the PC.
≥ When the unit is connected to a PC, its
power cannot be turned off. Disconnect the
USB cable before turning this unit off.
(l 80)
≥ Do not disconnect the USB cable or AC
adaptor while the access lamp is on or access
icon ( or ) appears on the LCD
monitor. Doing so may damage the data on the
HDD or SD card.
≥ The HDD and SD card cannot be accessed
simultaneously.
≥ It may be necessary to reboot the PC after
connecting this unit to it for the first time.
When the unit is connected to a PC, it is
recognised as an external drive.
≥ This unit supports only the readout of data
using the PC. The PC cannot write data to the
unit, or erase data from the unit.
≥ Depending on the operating environment of the
PC, the shape of the drive icon and the drive
name will differ.
∫ Drive icons
The icon is displayed in [My Computer (Computer)].
When accessing the HDD
≥ Windows Vista:
≥ Windows XP:
≥ Windows 2000:
When accessing the card
≥ Windows Vista:
≥ Windows XP:
≥ Windows 2000:
Connection and recognition
procedures
A
About the PC display
LSQT1361_EP(ENG).book 79 ページ ２００８年３月１４日 金曜日 午後３時４４分