Check the recording, Blank search function, Recording still pictures onto a card (photoshot) – Panasonic NVGS17EP Instrukcja Obsługi

Strona 19

Advertising
background image

Record mode

19

LSQT0910

Recording still pictures on a card
while recording image onto a tape

You can record still pictures while recording
image onto a tape.
Set to Tape Recording Mode.

1

Press the [PHOTO SHOT] button fully while
recording image onto a tape.

≥For the number of still pictures to be recorded

on a card, refer to

-52-

.

≥When recording pictures onto a card, the

recording start/stop button is disabled.

≥You can select a picture quality for still pictures

to be recorded. (

-20-

)

≥In order to record still pictures with higher

quality, we recommend using the card recording
mode.

Check the recording

The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set
to a recording pause.
Set to Tape Recording Mode.

1

Press the joystick during the recording
pause until the
icon

1 appears.

2

Move the joystick down to select the
recording check icon [

].

Blank search function

Searches for the last part of the image recorded
(unused part of the tape).
Set to Tape Recording Mode.

1

Set [BASIC] >> [BLANK SEARCH] >> [YES].

ª

Stopping blank search midway
through

Move the joystick down.

≥If the cassette tape has no blank part, then the

camera will stop at the end of the tape.

≥The camera stops at a point approx. 1 second

before the end of the last image recorded.
When you start recording at that point, the
image can be recorded seamlessly from the last
image.

Recording still pictures onto a card
(Photoshot)

Set to Card Recording Mode.

1

Press the [PHOTO SHOT] button.

ª

To record still pictures clearly

≥When zooming in on the subject with a

magnification of

4k to 10k or higher, it is

difficult to reduce the slight shaking from holding
the movie camera by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.

≥When recording still pictures, hold the movie

camera firmly with your hands and keep your
arms stationary at your side so as not to shake
the movie camera.

≥You can record stable pictures without shaking

by using a tripod and the remote control.
(NV-GS35 only)

≥For the number of still pictures to be recorded

on a card, refer to

-52-

.

≥The sound cannot be recorded.
≥While data are recorded on a card, do not

operate the mode dial.

≥When the access lamp is lit, do not insert or

remove a card.

PHOTO

SHOT

1

PC

PHOTO

SHOT

GS35_21_17EP.book 19 ページ 2005年1月14日 金曜日 午後1時37分

Advertising